$129

Relay Timer

Relay Timer is a powerful tool for NCD ProXR relay controller boards. It is a programmable timer. It supports up to 16 relay boards with 16 relay channels on each. Each relay can be programmed separately with multiple timers. It's very easy to control the relays automatically or manually. As the specialized software that intends to control the peripheral devices, the status of all relays can be shown and operated at the same time. It can detect all COM ports automatically regardless of whether they are real COM ports on motherboard or on supplementary in/output boards, or virtual COM ports created by special drivers. It can be used to control lights, motors, drippers, pumps, bells, audio, video signals and home automation.

Features

• Supports up to 16 boards.
• Supports 16 relay channels on each board with 16 separately control panels.
• Supports multiple timers for each relay.
• Supports turning on/off each relay manually.
• Supports turning on/off or inverting all relays directly.
• Display the current status of all relays.
• Automatically switch to manual mode after specified time.
• Status of relays can be saved for later loading.
• Time setting can be saved for later loading.
• Friendly GUI, easy to setup and use.

Relay Timer supports ProXR relay controller boards of National Control Devices (NCD) for now. Customization for other boards is available. More features will be included in later professional version. Such as supporting running as service program and controlling the boards from the internet/intranet. Embedded system will also be supported.