No, PTZ Controller can not work for IP camera. However, we are working on IP Camera Controller. It’s dedicated to control network cameras. Since, there are several kinds of IP cameras. If you send us the protocol of your network […]
Tag: PTZ Controller
Does PTZ Controller work with my PTZ Dome?
The best way to find the answer is to download the latest PTZ Controller and try it. http://www.serialporttool.com/download/PTZController/PTZController.zip It’s free to try all functions with the evaluation version within 30 days. There is no risk to test it. Before you […]
Can PTZ Controller work with multiple serial ports?
Yes, PTZ Controller software can work with multiple serial ports. Multi-instance of PTZ Controller can be run on one computer. Each instance can control a PTZ camera connected on a serial port. The instance of PTZ Controller can be run […]
Can PTZ Controller control multiple PTZ cameras?
Yes, PTZ Controller software can control multiple PTZ cameras, as long as the protocol of PTZ camera supports. For example, Sony VISCA protocol normally can support a daisy chain of up to seven attached cameras. PTZ Controller can control as […]
How to connect PTZ camera with the computer?
To control your PTZ camera with our PTZ Controller software, you must connect your PTZ camera with your computer at first. For computer, the RS232 port (serial port), so called COM port, is for connecting with PTZ camera. For […]
How to test the serial port connection between PTZ Camera and the computer?
You must make sure that the connection between PTZ Camera with your computer is available before using PTZ Controller software to control your PTZ camera. Usually, PTZ Camera are connected with the computer through RS232 port (serial port). Here is […]
PTZ Controller v2.9 – Support Sony AUX Commands
PTZ Controller v2.9 supports some auxiliary commands for Sony EVI D series, such as Turn On/Off Digital Zoom, Auto Focus, Back Light and Wide Mode. Select Sony protocol, the right Com Port and Baud Rate. Click AUX button to show […]
PTZ Controller v2.9 – Support Command Line Operation
PTZ Controller v2.9 supports command line operation to run PTZ Controller with a specified configuration file. Format: PTZController.exe -f "PathToConfigurationFile" Example I: Click Windows Start -> Run and open ‘cmd’. Type the command with arguments. Press ‘Enter’ key to launch […]
PTZ Controller v2.8
PTZ Controller is software to control high speed Pan Tilt Zoom camera through serial port. PTZ Controller includes features below: Support standard protocols for Pelco, AD, Bosch, Sony, Panasonic, Samsung, LG and Canon. Support control for Pan, Tilt, Focus, Zoom, […]
Keyboard Shortcuts for PTZ Controller
PTZ Controller supports standard Windows keyboard shortcuts. Key Function Key Function Focus Far Focus Near Zoom Out Zoom In Iris Close Iris Open Tilt Up Tilt Down Pan Left Pan Right Pan Left + Tilt Up Pan Right + Tilt […]