Yes, PTZ Controller software can control multiple PTZ cameras, as long as the protocol of PTZ camera supports. For example, Sony VISCA protocol normally can support a daisy chain of up to seven attached cameras. PTZ Controller can control as […]
How to connect PTZ camera with the computer?
To control your PTZ camera with our PTZ Controller software, you must connect your PTZ camera with your computer at first. For computer, the RS232 port (serial port), so called COM port, is for connecting with PTZ camera. For […]
How to test the serial port connection between PTZ Camera and the computer?
You must make sure that the connection between PTZ Camera with your computer is available before using PTZ Controller software to control your PTZ camera. Usually, PTZ Camera are connected with the computer through RS232 port (serial port). Here is […]
Auto Send Sequence Data at Given Time with Comm Operator
Here are the steps for sending sequence data at given time automatically with Comm Operator. Step 1. Run Comm Operator. Step 2. Select Edit->Auto Send from menu to open Auto Send Rule Setting dialog shown as below. Step 3. Click […]
Auto Send Data after Receiving Specified Data with Comm Operator
Here are the steps for sending data after receiving specified data automatically with Comm Operator. Step 1. Run Comm Operator. Step 2: Select Edit->Auto Send from menu to open Auto Send Rule Setting dialog shown as below. Step 3: Click […]
Auto Send Group Data in Fixed Interval with Comm Operator
Here are the steps for sending data in fixed interval automatically with Comm Operator. Step 1. Run Comm Operator. Step 2. Select Edit->Auto Send from menu to open Auto Send Rule Setting dialog shown as below. Step 3. Click New […]
N-Button v1.3
N-Button is a versatile program to create widgets on your desktop to control RS232 & Network related external devices, run applications, send http request or send data list. Build-in buttons to control relay boards of National Control Devices without any […]
PTZ Controller v2.9 – Support Sony AUX Commands
PTZ Controller v2.9 supports some auxiliary commands for Sony EVI D series, such as Turn On/Off Digital Zoom, Auto Focus, Back Light and Wide Mode. Select Sony protocol, the right Com Port and Baud Rate. Click AUX button to show […]
PTZ Controller v2.9 – Support Command Line Operation
PTZ Controller v2.9 supports command line operation to run PTZ Controller with a specified configuration file. Format: PTZController.exe -f "PathToConfigurationFile" Example I: Click Windows Start -> Run and open ‘cmd’. Type the command with arguments. Press ‘Enter’ key to launch […]
AO Command
AO Command is for “API Options”. It query/configures options for API. 0 – Default receive API indicators enabled 1 – Explicit Rx data indicator API frame enabled (0x91) 3 – enable ZDO passthrough of ZDO requests to the UART which […]