Time Travel is a FREE program. It can override the current computer clock with any time value. It can change the running speed of the computer clock. If the speed is set as 3600 times, that means a day will […]
Connect COM Port TCP UDP with Comm Tunnel Pro
Our Comm Tunnel Free software is a debug/test tool for COM port, TCP/IP or UDP. It builds a tunnel between endpoints, such as COM port to COM port, COM port to TCP, COM port to UDP, TCP to TCP, TCP […]
Test SMTP Gmail with Comm Operator
Comm Operator supports TLS (Transport Layer Security). Here is the example about how to send Gmail with SMTP protocol in Comm Operator. Download Comm Operator Run Comm Operator, and connect Comm Operator with Gmail server IP address and Port Number. […]
Control DMX Device with Comm Operator
Comm Operator supports FTDI connection, Binary panel and slider controller in Structured Data panel. That makes it easy to control DMX device. Download Comm Operator Latest Version Connect ENTTEC DMX USB Pro with your computer and DMX device. Run Comm […]
What’s the difference between PTZ keyboard hardware and PTZ Controller software?
Both PTZ keyboard hardware and PTZ Controller software are used to control PTZ camera. However, PTZ keyboard hardware supports limited protocols. It’s also much expensive. PTZ Controller software is dedicated to control PTZ cameras through computer standard keyboard and mouse, […]
802.15.4 ZigBee Module Pair Utility
802.15.4 ZigBee Module Pair Utility is dedicated tool for pair two 802.15.4 modules. It support both AT mode and API mode. It’s a free software for pair 802.15.4 ZigBee modules. Download 802.15.4 ZigBee Module Pair Utility (Free Software) How to […]
Send Remote AT Command in API Mode with ZigBee Operator
ZigBee Operator is a professional tool to learn, research, develop and test Digi’s ZigBee/XBee module. It implements both API encoder and decoder for Digi’s XBee & ZigBee Mesh and 802.15.4. Both AT and API commands are supported. It’s so easy […]
Send I/O AT Command in API Mode with ZigBee Operator
ZigBee Operator is a professional tool to learn, research, develop and test Digi’s ZigBee/XBee module. It implements both API encoder and decoder for Digi’s XBee & ZigBee Mesh and 802.15.4. Both AT and API commands are supported. Download ZigBee Operator […]
Focus Auto/Manual Command for Canon PTZ Camera
PTZ Controller software supports Canon protocol. It’s easy to control Pan, Tilt and Zoom for Canon VC series or Canon XU/BU series PTZ Camera with PTZ Controller after you select right COM Port, Protocol, Baud Rate and camera address. To […]
Control Canon PTZ Camera with PTZ Controller
PTZ Controller software supports Canon protocol for Canon VC camera series and Canon XU/BU camera series. PTZ Controller allows you to control your Canon Pan Tilt Zoom camera, such as VC-C4 and XU80, with your computer. That is you can […]