LineMode 3000 HH:mm:ss true false false true Send: Rec: Status: Red Black Blue 0D MM/dd/yyyy, HH:mm:ss.fff false false 1 1 false false true 10 10 CS_FF_A_B Standard false 1 true true Hex true Normal 700 600 760 281 230 false 103 Trun Off Relay 1 in Bank 1 Dec /mQB 254,100-107, Bank Turn Off Individual Relays in Bank Unchecked Unchecked Unchecked 201 100 100 100 Trun Off Relay 1 in Bank 1 Dec /mQB 254,100-107, Bank Turn Off Individual Relays in Bank Unchecked Unchecked Unchecked Turn on Relay 1 in Bank 1 Dec /mwB 254, 108-,115, 1 turn on relay 1 - 8 in bank 1 Unchecked Unchecked Unchecked Trun Off Relay 1 in Bank 2 Dec /mQC 254,100-107, Bank Turn Off Individual Relays in Bank Unchecked Unchecked Unchecked Turn on Relay 1 in Bank 2 Dec /mwC 254, 108-,115, 2 turn on relay 1 - 8 in bank 2 Unchecked Unchecked Unchecked Trun Off Relay 1 in Bank 3 Dec /mQD 254,100-107, Bank Turn Off Individual Relays in Bank Unchecked Unchecked Unchecked Turn on Relay 1 in Bank 3 Dec /mwD 254, 108-,115, 3 turn on relay 1 - 8 in bank 3 Unchecked Unchecked Unchecked Turn On Automatic Relay Refreshing Dec /hk= Turn On Automatic Relay Refreshing Unchecked Unchecked Unchecked Turn Off Automatic Relay Refreshing Dec /ho= Turn Off Automatic Relay Refreshing Unchecked Unchecked Unchecked Turn Reporting Mode On Dec /hs= 27 Turn Reporting Mode ON By default, Reporting Mode is off. Reporting mode confirms the completion of most commands by sending an ASCII character code 85 back to the user. Reporting mode does NOT confirm the completion of E3C commands, or any command that sends data back to the user. Reporting mode is stored in non-volatile memory. Reporting mode slows communications and is only recommended in high-reliability installations. Unchecked Unchecked Unchecked Turn Reporting Mode Off Dec /hw= 28 Turn Reporting Mode OFF This command turns off the reporting function. Reporting mode is stored in non-volatile memory. This is the default setting. Unchecked Unchecked Unchecked Test Two Ways Communication Dec /iE= This command can be used to test 2-way communication between the host computer and the relay controller. When executed, the relay controller will send ASCII character code 85 back to the user. This command should be used for initial installations if 2-way communication is required. It can also be used to detect the presence of a relay controller on the serial port. Unchecked Unchecked Unchecked Store Relay Refreshing Mode Dec /iM= Store Relay Refreshing Mode Unchecked Unchecked Unchecked Report Back Stored Refresh Settings Dec /iQ= Report Back Stored Refresh Settings Unchecked Unchecked Unchecked Manually Refresh Relay Bank Dec /iU= Manually Refresh Relay Bank Unchecked Unchecked Unchecked Set Status of All Relays Dec /iiq This command is used to set the status of all relays at one time. A single parameter is required. The equivalent binary pattern of the parameter is copied directly to the relays, instantly setting the on/off status of all relays on the board. 170 will set the relays status to On Off On Off On Off On Off Unchecked Unchecked Unchecked Store Pattern In Bank Dec /ioB This command stores the current on/off setting of all relays into a memory bank (0-15). This command is useful for creating macros or for making sure certain relays are never activated simultaneously. Unchecked Unchecked Unchecked Recall Pattern in Bank Dec /is= This command recalls a stored relay pattern from the user selected memory bank (0-15) and update all relays on the board to the settings defined by command 42 above. Unchecked Unchecked Unchecked Relay Select Dec /iwA This command turns off all relays and then turns on the selected relay only. This command performs a safe “Break Before Make”, ensuring that no two relays are ever activated at the same time. Unchecked Unchecked Unchecked Turn On Relay 1 in Bank1 Dec /mwB 254,108-115 Turn On Individual Relays in Bank Unchecked Unchecked Unchecked Get Status of Relay 1 in Bank 1 Dec /nQB 254,116-123, Bank Get the Status of an Individual Relay in Bank This command allows you to read the on/off status of an individual relay. 16 (or 116) corresponds to relay 1, 23 (or 123) corresponds to relay 8. This command will return a 1 indicating the relay is ON or a 0 indicating the relay is OFF. NOTICE: A BANK VALUE OF 0 IS INVALID FOR THIS COMMAND. RETURNED RESULTS MAY BE UNPREDICTABLE. Unchecked Unchecked Unchecked Get the status of all relays in bank 1 Dec /nwB Get the Status of All Relays in Bank Unchecked Unchecked Unchecked Turn All Relays Off In Bank Dec /oEB 254, 129, Bank Turn All Relays On in Bank This command is used to activate all relays in a selected relay bank. NOTE: A Bank Value of 0 applies this command to all relay banks. Unchecked Unchecked Unchecked Turn All Relay On in Bank 1 Dec /oIB 254, 130, Bank Turn All Relays Off in Bank This command is used to turn all relays off in a selected relay bank. NOTE: A Bank Value of 0 applies this command to all relay banks. Unchecked Unchecked Unchecked Invert All Relays in Bank 1 Dec /oMB This command is used to Invert the status of all relays. Relays that were on turn off, relays that were off turn on. Unchecked Unchecked Unchecked Reverse All Relays in Bank 1 Dec /oQB 254, 132, Bank Reverse All Relays in Bank This command is used to reverse the current pattern of relays in a given relay bank. Unchecked Unchecked Unchecked Set the Status of Relays in Bank 1 Dec /oyqAQ== 254, 140, RelayData, Bank Set the Status of Relays in Bank This command writes a byte of data directly to a relay bank. This allows you to easily set the status of 8 relays at one time. RelayData is a parameter value from 0-255. A value of 0 turns off all the relays. A value of 255 turns on all the relays. Other values set the status of the relays in the equivalent binary pattern of the RelayData parameter value. NOTE: A Bank Value of 0 applies this command to all relay banks. Unchecked Unchecked Unchecked Store Power Up Default Status in Bank 1 Dec /o6qAQ== This command stores the current status of the relays in a given bank into memory. The next time power is applied to the controller, relays will return to the stored on/off state. A bank value of 0 stores the pattern of all relays in all 26 banks. Unchecked Unchecked Unchecked Read Power Up Default Status in Bank Dec /o8B 254, 143, Bank Read Power Up Default Status in Bank This command reads the stored power-up default status of the relays in a given bank. A bank value of 0 reports back 26 bytes of data, indicating the stored pattern of all 26 relay banks. Unchecked Unchecked Unchecked Direct Commands to Bank 1 Dec /jEB 254, 49, Bank Direct Commands to Selected Relay Bank This command is used to direct commands to a selected relay bank. Unchecked Unchecked Unchecked Link1 ComPort COM1 115200 8 None One None 1024 1024