About Registration

After you order our software, PTZ Controller, Comm Operator, ZigBee Operator, N-Button, Relay Timer series or Quick Timer series, you will receive the registration code. Please keep it well.

When you register the software, the registration code will be verified on our server automatically.

You just need to input/copy the code to the registration remind dialog and click the Register button. The registration will be done automatically as long as the registration code is available.

One registration code or license can be installed up to 3 computers, which belongs to the same user.

If you have problem about registration, please check the list below.

1. Make sure your Windows system is updated with latest service pack.

2. Make sure your computer is connected with internet, and the test link could be opened.


3. Make sure the code is correct. We suggest you copy the code to avoid typing mistake.

4. You need to shutdown the antivirus software when you register.

5. Please install the latest version, which can be downloaded on our webpages.

6. For 64-bit Windows 7, our software need to be installed under the Administrator account. Please refer to the following link.


If you still can not register, please send us detail information about your operation system. We will try our best to solve the problem and reply to you soon.  support@serialporttool.com

Back to Serial Port Tool homepage

This entry was posted in Comm Operator, N-Button, News, PTZ Controller, Quick Timer Series, Relay Timer Series, ZigBee & XBee and tagged , , . Bookmark the permalink.